I've been an automotive painter and body man, air craft mechanic, I fix just about all my own stuff, I'm very much a mechanically inclined and experienced tool thrower, and I found this kit frustrating. The stuff I had control over, like the cut down the middle, came out perfect. This package includes all the hardware, Universal Slider Tracks and Slider Pins, and step by step instructions to safely split your boardyou provide the saw, cajones, and ingenuity. I know the Voile kit has special pucks that are supposed to be usable with non splitboard bindings. This second-generation kit contains step-by-step instructions, plus all the hardware you need. Like my previous Lib split, after spending the past couple of years using the board for ski patrol, it was a good time to turn it into a splitter. Weight 0.79kg Savings to be had if ordering with skins and crampons. Drill a pilot hole on the top with the1/4-inch bit then countersink the T-nuts with the 3/4-inch bit on the base. The Split Kit works with nearly any binding and board combination. "The Voile Split Kit is the do-it-yourself saw your old board kit. Breathe life into your splitboard skins with the Voil Splitboard Skins Tail Clip Kit. Enough of boot packing and snowshoes. Now it was time to cover the sides with the fiberglas tape. The price is . Snowboard should be a wood-core board. Step 4: Covering the Sides With Fiberglas Tape. This kit includes all the DIY Voile splitboard hardware and step-by-step instructions to split your old board. March 31, 2012 at 8:22 pm #632910. maniacdave. The Voile Split Kit includes all the DIY Voile splitboard hardware and step-by-step instructions to split your old board. Might be buying a board that was converted to a splitboard with the Voile kit. Improvements include completely the Voil Split Kit Puck with 2-hole secure t-nut mounting, lighter Voil touring brackets, more durable rear tabs on the Voil Slider . Improvements include completely new Voile Split Kit Puck with 2-hole secure t-nut mounting, lighter Voile touring brackets, more durable rear tabs on the Voile Slider Track, new binding support riser for easier uphill skinning and side-hilling, and new durable plastic coated climbing wires. (WARNING: If the distance from the end of your skins to the tail of the board . This package includes all the hardware, Universal Slider Tracks and Slider Pins, and step by step instructions to safely split your board--you provide the saw, cajones, and ingenuity. With a DIY kit from manufacturers like Utah's Voile or Colorado's Prowder Splitboard Systems ($120-$160), you can convert that old board into a new splitboard for around $200. The Voile Split Kit includes all hardware and step-by-step instructions to split your old board. It is easy to install and has good instructions. This includes splitting the board and installing Voile kit, with our upgraded hardware, performing an advanced tune which includes base repair, edge sharpen/burr repair and a hot wax with your choice of temperature specific environmentally friendly wax. My only bad con is that the product is a little over priced but i guess that is what happens when there are no other manufacturers. Turn any snowboard into a backcountry gem with the Voile Split Kit. You put skins on it that has little scales that slide forward but grip backward to help out. I saw a sweet deal on explorers so went ahead and picked them up while I was still looking for a board. If touring with the straight edge of board halves on the inside, pivot the interlocking hooks onto the board so they are clear of the edge of the board half. The Voile Split Kit is the do it yourself saw your old board kit. Instead of hiking up in snowshoes with your snowboard on your back (which sucks unholy ass), the split board comes apart and you use it like skis on the accent. Great way to make your own split out of an older board! Mark center of board A. Just add climbing skins and away you go. Also, I wanted to try how to work with it, as I have never used it before. The Split Kit works with nearly any binding and board combination. Among other tidbits, the kit includes 2 Voil Slider Tracks, a full puck set and alignment guide, 2 Dual Climbing Heel with 55mm and 75mm climbing wires, and of course, 2 Voil Slider Pins. Sold Out. The Voile Split Kit includes all the DIY Voile splitboard hardware and step-by-step instructions to split your old board. DSA_CATEGORY:SNOWBOARD-BINDINGS DSA_MARKETABLE_CATEGORY:SNOWBOARDING DSA_DEPARTMENT:WINTER-SPORTS DSA_IS_APPAREL:FALSE. Drops, butters and roosters - with the Xsight you not only . Talk with an expert about Voile Split Kit Pucks DIY - Snowboard Bindings to get unbiased recommendations and great deals. Please Read! Features of Voile Split Kit: Attention! The Split Kit works with nearly any binding and board combination. Foam-core boards are not suitable for the touring binding. The Voile Split Kit includes all the DIY Voile splitboard hardware and step-by-step instructions to split your old board. Voile Instructions Universal Splitboard Kit DIY Splitboard Kit Channel Splitboard Setup - Canted Pucks Regular Factory Splitboard Setup - Canted Pucks Skins Tail Clips Crampons Climbing Skins Light Rail Instructions Speed Rail Instructions Dual Climbing Heel Lock Dual Climbing Heel Lock Retrofit Kit Splithook CAM Bushings Spark RD Instructions Voil Split Kit Instructions Note: Read all instructions completely before you begin. So you can keep climbing when things get a little sloppy. A split-board is meant for backcountry. S+W Verdict: "A surprsing best seller for us last season. Does NOT mount onto factory-built splitboards that have inserts! For t-nutting the base, use a slow cure marine epoxy. Improvements include completely new Voile Split Kit Puck with 2-hole secure t-nut mounting, lighter Voile touring brackets, more durable rear . The Voile Split Kit includes all the DIY Voile splitboard hardware and step-by-step instructions to split your old board. Tighten the screws using blue Locktite. I can't say I'd recommend it. Voile Switchback Backcountry Kit. The Voile Split Kit is the do it yourself saw your old board kit. Sky's Review of Voile Split Kit The Product is great. Turn any snowboard into a backcountry gem with the Voile Split Kit. I wouldn't say the risks are all that great, the task really isn't anything more than taking a plank of wood & mounting some hardware to it. This hardware kit is for factory-built splitboards that have inserts. The Split Kit works with nearly any binding and board combination. I think you could just use some glue and "paint" it on, but I wanted something a bit more durable. Included Slider Track is compatible with regular snowboard bindings. The Voile Split Kit includes all hardware and step-by-step instructions to split your old board. Included Slider Track is compatible with regular snowboard bindings. As for the Voile split DIY kit. . If you do not feel condent to perform any of the steps contact Voile directly at 801-973-8622 or info@voile.com. Detailed instructions that I like to consult when creating a new split are the DIY Voile Split Kit instructions, found here. UPC This package includes all the hardware, Universal Slider Tracks and Slider Pins, and step by step instructions to safely split your boardyou provide the saw, cajones, and ingenuity. Details Whether it's your old DIY or your favorite factory split, the Cam Bushing allows for 2mm of adjustment, eliminating the need to re-drill or replace your aging hardware. Please Read! The Voile DIY Split Kit is the original and only DIY system for making your own splitboard. Description Convert your old snowboard into a splitboard, then skin into places lifts can't take you. 3.) Now, clamp the board with the base up and . Description The Voil Cam Bushing was designed as a simple, easy to use mechanism to remove any loose play in your splitboard hooks. Watch a step-by-step mounting manual for the Volkl Xsight splitboard, which comes with the official Voil Split Kit (voile split kit). 564 Posts. Using your regular snowboard binding for your splitboard? Splitboard bindings, splitboard skins, splitboard hardware, splitboard kits, and splitboard accessories. The Voile Split Kit is the do it yourself saw your old board kit. This package includes all the hardware, Universal Slider Tracks and Slider Pins, and step by step instructions to safely split your board--you provide the saw, cajones, and ingenuity. Compatibility Attention! It includes all the DIY Voil splitboard hardware and step-by-step instructions to split your old board. Yes, it's a lot of bits and pieces and not as easy as tying your shoe to install, but don't be daunted by it all. Mark the centerline on the base with a flexible straight edge and a marker-for a smoother slice, cut small notches in the tip and tail with a hack saw. Voile Splitboard (DIY) Kit $159.95 out of stock Description This is the cut-your-old-board kit. This kit include a bomber riveted tail attachment, a durable urethane Voil Strap and aluminum tail clip. It is NOT for Sawing Your Old Board (Split Kit - DIY). $159.99 Quantity Add to Cart The Voile Split Kit is the do it yourself saw your old board kit. This hardware kit is for Sawing Your Old Board. Part 1 of 2-part comprehensive step by step video of how to make a splitboard and install the Voile Split Kit - DIY Saw Your Old Board Kit.Presented by Voil. Really cool way to use that old board that you're not using anymore and get out into the Backcountry. Includes a new Voile Split Kit puck with 2-hole, secure T-nut mounting, lighter touring brackets, and more durable rear tabs on the slider track The Voile Split Kit includes all the DIY Voile splitboard hardware and step-by-step instructions to split your old board. The Split kit made my old snowboard function just as well as a factory built splitboard. . Instructions Questions? The Voile Split Kit is the do it yourself saw your old board kit. Got a new splitboard and it's not a Voile? Turn any snowboard into a backcountry gem with the Voile Split Kit. Improvements include completely new Voile Split Kit Puck with 2-hole secure t-nut mountin, lighter Voile touring brackets, more durable rear tabs on the Voile Slider Track, new binding support riser for easier uphill skinning and side-hilling, and new durable plastic coated climbing wires. Mount any regular snowboard binding to the Voile Slider Track Return shipping is included; we only ask that you pay to have your board shipped to us. Holding one board half steady, pull up on the other half to dis- engage the Tip and Tail Interlocking Hooks. Overall, this was another fun project, and it's been great getting . With the climbing block in place set the climbing bar at the block's end, with the bar facing the nose. This is the rest of hardware you need to get on the snow. Drill and mount just like the brackets, but with the 10/32-inch screws and T-nuts. 24hr+ cure time. Voil Universal Splitboard Hardware Set-up Instructions 1 Puck Alignment Guide 4 Pucks 2 Parallel Slot Disks 2 In-line Slot Disks 4 Rubber Puck Gaskets 8 M6 x 12mm Pan-head Mounting Screws 8 T-nuts (6mm) for binding mounting 2 Slider Tracks 2 Slider Pins w/ Leashes 1 2 3 4 5 6 7 8 9 If you can do that, you can build a splitboard. Get up to speed with the Voile Split Decision Kit.

Belkin Magnetic Wireless Power Bank 10k, Furniture Of America Rustic Bed, Klein 6-in-1 Screwdriver, Brake Rotor Lathe Machine, Bermuda Wicker Furniture, H&m Ribbed Jersey Jazz Trousers, Germicidal Uv Lamp Specifications, Amsterdam Business School Mba Fees, Ben Sherman Shirts Debenhams, Outdoor Research Men's Jacket,